DELTA ELECTRONICS (THAILAND) PUBLIC COMPANY LIMITED
Board of Directors
Company Risk
The impact of uncertain or recurring adverse events may create liquidity constraints, limit access to funding sources, and increase reliance on external borrowings. In addition, foreign exchange volatility in 2025 particularly the significant appreciation of the U.S. dollar against the Thai Baht and Indian Rupee may increase the cost of imported raw materials and place further pressure on liquidity. The Company has observed that for every 10% depreciation of the Thai Baht, procurement costs for foreign currency-denominated raw materials increase by approximately 5–7%. Such fluctuations may have a material adverse effect on profitability and cash reserves, thereby impacting the Company’s financial stability and overall liquidity position.
The Company targets maintaining its debt-to-equity ratio below 1.0x in order to preserve liquidity. Based on the latest risk prioritization assessment, liquidity risk has been rated at a very low level in terms of both impact and likelihood. This assessment is consistent with the Company’s financial position, as reflected in its debt-to-equity ratio, which remains at a sound level and serves as a key indicator of effective risk management. Given the nature of its export-oriented business, the Company has established comprehensive policies and implemented a range of measures to minimize control gaps and enhance responsiveness. These measures enable the Company to respond in a timely manner to emerging risks as they arise.
Based on a review of financial performance over the past 10 years, the impact of foreign exchange fluctuations on costs has ranged between -0.02% and -0.08%, while the impact on revenue has ranged from 0.0% to -1.19%. Compared with the Company’s established risk control targets, these results indicate that foreign exchange risk has been effectively managed. [image]
The Company aims to limit the impact of foreign exchange fluctuations on key financial performance to no more than 10%, with an acceptable deviation threshold of 1%. To mitigate potential losses, the Company employs a range of financial instruments and risk management measures, including natural hedging through commercial contracts, forward exchange contracts, and netting arrangements for receivables and payables.
- Increased capital expenditures and operating costs in the short term from initiatives to reduce greenhouse gas emissions (Scope 1, 2, and 3), as well as renewable energy programs (RE100, EV100/ZEV) - Potential impact on cash flow and return on investment (ROI) if projects do not perform as planned or require longer payback periods - Increased organizational and operational complexity, which may affect efficiency - Higher compliance costs and potential financial exposure arising from evolving carbon regulations across jurisdictions - Coordination challenges across functions (e.g., Sustainability, Finance, Procurement, IT), which may lead to delays in project execution
- Establishment of clear short-term and long-term targets (Net Zero by 2050 and interim targets by 2030) - Implementation of key initiatives, including: - RE100 to achieve 100% renewable energy usage - EV100/ZEV to transition to fully electric vehicles - Adoption of Internal Carbon Pricing (ICP) as a strategic management tool by: - Charging carbon fees to business units - Establishing a carbon fund to invest in renewable energy, resource efficiency, and low-carbon innovation - Integration of carbon costs into investment decision-making to support the transition to a low-carbon economy - Strengthening cross-functional collaboration (Sustainability, Finance, Procurement, IT) to enhance execution efficiency - Ongoing monitoring of investment performance, with completed projects demonstrating an average payback period of approximately 2.33 years - Continuous tracking of project progress (72% completion as of 2025) and regular assessment of financial impacts
- Increased labor costs may adversely affect profit margins and the Company’s liquidity - Talent shortages may impact operational efficiency and business continuity - Delays in production transfer may affect revenue recognition, cash flow, and delivery performance - Overall cost pressures may weaken long-term financial stability
1. Talent Acquisition and Retention Strategy - Expand global recruitment efforts, focusing on highly skilled and diverse talent - Enhance employee engagement and improve the working environment - Establish clear career development pathways and recognize employee achievements - Implement referral incentive programs to attract qualified candidates 2. Upskilling and Reskilling Initiatives - Invest in comprehensive training programs, both in-house and in collaboration with academic institutions - Develop specialized skills and leadership capabilities to support future growth 3. Cost Management and Productivity Enhancement - Accelerate investments in automation and advanced technologies - Optimize workflows and improve workforce utilization - Conduct regular operational efficiency reviews to eliminate inefficiencies 4. Stakeholder Engagement - Maintain transparent communication regarding cost pressures and liquidity impacts - Collaborate closely with supply chain partners and government authorities 5. Employer Branding and CSR Initiatives - Strengthen corporate image through CSR and sustainability programs - Enhance employer branding to attract and retain talent 6. Liquidity and Financial Risk Management - Conduct stress testing at least twice annually - Regularly monitor key risk indicators (KRIs) - Maintain prudent financial ratios (e.g., Quick Ratio, D/E Ratio)
- Potential impact on the Company’s liquidity due to large capital expenditures - Uncertainty in achieving expected return on assets (ROA) if the project does not proceed as planned - Delays in construction or machinery delivery may affect production commencement and revenue generation - Increased project costs due to external factors such as weather conditions or force majeure events - Potential impact on stakeholder confidence and corporate reputation However, the Company has assessed that: The impact on liquidity is very low
- Investment appraisal (ROA analysis) - Based on historical purchase orders and forward orders - Transparent contractor selection process - Criteria include quality, safety, timeline, and payment terms - Penalties for delayed delivery are clearly defined - Construction risk management - Joint assessment of force majeure risks with contractors - Preventive measures include: - Temporary flood protection systems - Dust control measures - Construction scheduling aligned with weather conditions - Establishment of a project control team - To monitor construction progress and machinery installation - Ensuring alignment with timelines and targeted ROA - Machinery procurement strategy - Purchase of new machinery from Delta group companies with strong technical expertise - Acquisition of used machinery from affiliated companies with relevant production experience - All transactions are supported by independent valuation - Market demand alignment - Supporting production relocation from China to Thailand - Enhancing order volumes in target product segments
Changes in such economic policies and regulations may reduce the advantages of the tax incentives received by the Company or increase its tax cost burden in the future.
The Company closely monitors developments in relevant regulations and continuously assesses their potential impacts on cost structure, cash flow, and liquidity to ensure effective risk management and the maintenance of financial stability. To address the implications of such tax measures, the Company has implemented the following key actions: - Conducting comprehensive tax analyses, including applicable tax incentives, to evaluate potential scenarios and financial impacts, as well as to identify initiatives to reduce costs and enhance profitability - Maintaining close communication with customers to ensure mutual understanding of the impacts and to align on pricing and operational arrangements. Based on customer feedback, the Company may advance duty payments on behalf of customers and recognize such amounts as revenue upon reimbursement, in accordance with accounting principles, in order to accommodate U.S. retaliatory tariff measures in 2025 - Continuously investing in research and development in line with its strategy to strengthen innovation capabilities and support global customers. Over the past 10 years, the Company’s R&D investment has averaged 3.9% of total revenue - Implementing the DET e-Tax system to enhance the accuracy and efficiency of revenue reporting and tax calculations, with relevant data subject to multi-level review prior to being recorded in the financial system - Providing training programs for relevant functions, including finance, international legal, and sales teams, to ensure a comprehensive understanding of tax measures and related practices. All personnel in these functions have received training from both internal and external experts - Integrating tax expenses into cost and profitability analysis by business segment to enhance cost discipline and management awareness - Actively managing foreign exchange risks to support profitability, despite increased tax burdens arising from the implementation of top-up tax regulations in Thailand in alignment with global minimum tax requirements As a result of these measures, the Company achieved record-high net profit in 2025, supported by improved profit margins. [image]
China’s “Made in China 2025” policy, which aims to strengthen the electric vehicle (EV) industry through various support measures such as subsidies, tax incentives, procurement policies, and infrastructure investments, is likely to propel China to become a leading global producer and exporter of EVs. However, international trade policies continue to impact related industries. Since 2016, exports of automotive parts and vehicles from China have been continuously affected by tariff measures, with increasing intensity driven by U.S. policies imposing import tariffs of up to 100% on automotive and electronic components from China. Such trade retaliations have had widespread impacts on the technology sector and global supply chains.
To address stakeholder concerns while appropriately reflecting the proportion of green revenue, the Company has enhanced its revenue disclosure by business segment since 2024 to better highlight the growth of its automotive business, which was previously included under the infrastructure segment. In addition, the Company has implemented a range of strategic initiatives to sustain long-term and resilient growth, as outlined below: Supply Chain Resilience Enhancement The Company has expanded its supplier base (supplier diversification) while reducing reliance on single-source critical materials. It has also entered into long-term procurement agreements with suppliers in stable regions and increased localization of production to mitigate the impact of trade barriers and tariffs. In addition, the Company promotes circular economy practices within its supply chain to strengthen strategic collaboration and ensure long-term material security. Market Expansion and Customer Base Diversification The Company is focusing on growth in high-potential regions such as Southeast Asia and India, where energy transition is accelerating and electric vehicle (EV) adoption continues to rise. Government policies in these regions support both manufacturers and end-users, helping to mitigate risks associated with geopolitical uncertainties. Innovation and Product Differentiation Acceleration The Company continues to develop high-efficiency energy solutions, including advanced EV power modules and fast-charging infrastructure. The integration of energy storage systems with charging solutions further supports renewable energy adoption. In addition, the application of artificial intelligence (AI) in automation enhances production efficiency and reduces operating costs. Strategic Partnerships Strengthening The Company collaborates with EV manufacturers to expand the application of its solutions across a wider range of vehicle platforms. Partnerships with charging network providers and research and development institutions further accelerate technological advancement and strengthen the Company’s competitive position in the EV ecosystem. Policy Advocacy and Regulatory Engagement The Company actively participates in policy dialogues to support the development of a sustainable EV supply chain. It also enhances sustainability disclosures in alignment with global standards, reinforcing corporate credibility and long-term resilience. According to the audited financial statements, revenue from the EV business accounted for 17% of total revenue (2024: 27%). The decline was primarily due to geopolitical tensions, global economic slowdown, and the increasing frequency of extreme weather events. Nevertheless, the Company’s green revenue derived from products and solutions that support energy transition, climate adaptation, and digital transformation remained strong, accounting for 72% of total revenue (2024: 75%).
This decline in climate-related investment may heighten risks of non-compliance with ESG standards, disrupt supply chains, reduce investor confidence, and lead to the emergence of new trade barriers. These factors could place U.S. exports at a disadvantage in markets with strict environmental requirements. In addition, rising geopolitical tensions among major powers may drive greater global reliance on the European Union in advancing net-zero greenhouse gas emission targets.
To mitigate risks arising from increasingly stringent global climate-related regulations, Delta has implemented a range of proactive measures as follows: Strengthening Regulatory Compliance and Sustainability Reporting The Company aligns with key global frameworks, including the EU Carbon Border Adjustment Mechanism (CBAM), climate-related disclosure guidelines, and emerging sustainability reporting standards in Asia, to ensure full compliance across major markets. Enhancing Supply Chain Readiness The Company requires suppliers in key regions, such as China, Thailand, and the European Union, to comply with international environmental standards. ESG assessments are conducted, and third-party certifications such as ISO 14001 and ISO 14067 are applied. In addition, both online and offline training programs are provided to ensure suppliers remain up to date with relevant standards, best practices, and regulatory requirements. Diversifying Markets and Supplier Base The Company reduces reliance on markets and suppliers in regions with high regulatory uncertainty by expanding its supplier network into regions with more stable climate policy environments. Investing in Low-Carbon Solutions and Circular Economy The Company continues to invest in the research and development of environmentally friendly products and explores the use of recycled materials in line with eco-design principles. It also adopts Extended Producer Responsibility (EPR) practices, which are increasingly recognized as global best practices. Monitoring and Engaging in Policy and Regulatory Developments Business unit leaders are responsible for monitoring laws and regulations relevant to their functions, while the legal department tracks regulatory developments at both national and regional levels. The Risk and Sustainability Committee oversees ESG-related matters to ensure alignment with evolving global standards. In addition, the Company collaborates with industry partners and policymakers to stay informed of regulatory trends, enabling timely strategic adjustments. Enhancing Digital Compliance Systems The Company leverages AI-driven regulatory monitoring tools and supply chain transparency systems to track emissions, carbon tax exposure, and environmental impacts in real time. In 2025, the Company did not incur any fines related to non-compliance with applicable laws and regulations.
- Potential disruption to production efficiency and output during the transition phase - Risk of delays in production and delivery, which may impact customer satisfaction - Possible quality inconsistencies during initial setup and ramp-up period - Increased operational complexity and coordination challenges across regions - However, successful relocation may: - Reduce exposure to U.S. tariffs - Support the China+1 strategy - Enhance access to skilled labor and local incentives - Strengthen long-term competitiveness and sustainability alignment
- Production relocation procedures (Regulation No. 06-034) - Establish clear guidelines for all relevant personnel - Cover production setup planning, technology transfer, material sourcing, quality control, labor management, and stakeholder communication - Knowledge transfer and sharing - Deployment of R&D, production, and technical teams from Thailand and India to the original production sites - Post-installation support from original product teams (6–12 months) - Regular cross-regional factory quality audits (quarterly) - Workforce management - Integration of experienced and new employees in production lines - Comprehensive onboarding covering corporate culture, ESG goals, safety, and work instructions - Mandatory training on RBA Code of Conduct and data security - Annual re-certification with 100% passing requirement - Training programs - Investment in upskilling local workforce - Alignment with Delta’s global production standards - Local sourcing strategy - Strengthening partnerships with local suppliers - Ensuring sufficient supply of critical raw materials - Reducing dependency on global supply chains
Since 2024, China has strengthened its control over rare earth elements as part of its strategic national security agenda, particularly through export controls on extraction and separation technologies, as well as the expansion of controlled mineral lists. Key measures have been implemented in three phases: - Phase 1 (late 2024 – January 2025) : Export controls were imposed on seven categories of medium and heavy rare earth elements, including Samarium, Gadolinium, Terbium, Dysprosium, Lutetium, Scandium, and Yttrium, which are critical inputs for high-tech industries and electric vehicles. - Phase 2 (October 2025) : The export control list was expanded to include five additional elements Holmium, Erbium, Thulium, Europium, and Ytterbium as well as related magnets and materials, requiring additional export licensing. - Phase 3 (October 2025 – ongoing) : Restrictions were introduced on the export of technologies related to the extraction and separation of rare earth elements, covering production processes, equipment, and technical know-how, to maintain leadership in the rare earth supply chain. In addition, China has implemented production quotas for rare earth oxides to control output levels and manage domestic resources effectively. These control measures may contribute to unfair competition within the supply chain and heighten risks related to climate change, environmental degradation, corruption, and human rights. Expansion of mining activities into new areas may lead to ecosystem disruption, pollution, and environmental deterioration. At the same time, pressure to meet market demand may incentivize regulatory avoidance, while corruption can facilitate illegal mining and weak enforcement. Furthermore, human rights violations such as unfair labor practices and unsafe working conditions may adversely affect workers and local communities. These risks underscore the importance of adopting sustainable and ethical business practices to safeguard the environment and uphold human rights in long term.
Strengthening Due Diligence and Transparency Delta does not source minerals from Artisanal and Small-Scale Mining (ASM) and is committed to enhancing supply chain transparency through comprehensive supplier due diligence and traceability of raw materials using the Ethical Minerals Reporting Template (EMRT). This approach enables the Company to consistently track sources of materials and conduct regular risk assessments to ensure that suppliers comply with ethical standards while minimizing risks related to exploitation and environmental impact. In addition, Delta has adopted stringent sustainable sourcing standards, prioritizing suppliers with environmentally responsible practices and internationally recognized certifications. This significantly reduces environmental impacts and supports the Company’s long-term sustainability objectives. Strict Anti-Corruption Policy Enforcement Delta enforces a strict anti-corruption policy to ensure supplier compliance with ethical standards through regular audits and clearly defined anti-bribery measures. Suppliers are required to disclose relevant information via the EMRT, enabling effective traceability of mineral sources. This approach helps mitigate corruption risks and promotes transparency across the supply chain. Capacity Building and Stakeholder Engagement Delta places strong emphasis on capacity-building initiatives through training programs that focus on labor rights, occupational safety, and sustainability. Participation in these programs enhances the capabilities of local communities and improves working conditions. The use of EMRT further ensures alignment with human rights standards and helps reduce the risk of exploitation within the supply chain. Promoting Circular Economy in the Supply Chain Delta collaborates closely with suppliers to enhance sustainable business practices by promoting the use of environmentally friendly packaging and reducing waste generated from procurement processes. The Company applies reverse logistics principles, enabling packaging materials to be returned to suppliers for recycling or reuse, thereby supporting resource circularity. In addition, Delta works with suppliers to reintroduce scrap materials into production processes. Preference is given to suppliers that utilize recycled materials and demonstrate strong sustainability practices, with opportunities for increased business allocation. Supplier Engagement on Regulatory Compliance Delta organizes annual supplier meetings to communicate updates on increasingly stringent regulations in the mining and supply chain sectors. The Company supports the adoption of global sustainability standards and actively engages in policy dialogue. Through various initiatives such as webinars, online sustainability and Responsible Business Alliance (RBA) assessments, and on-site audits Delta promotes industry best practices and encourages suppliers to align with these standards. Delta maintains a zero-tolerance policy toward corruption and human rights violations within its supply chain. Currently, 100% of smelters associated with 3TG minerals, cobalt, and mica in Delta’s supply chain have completed and disclosed information through the EMRT.
The spread of false information may adversely affect the Company’s reputation and corporate image, leading to a decline in consumer confidence and potential disruptions to critical supply chains. As Delta remains committed to advancing sustainable technologies, maintaining credibility and trust in the brand is essential to driving the success of its green initiatives. Accordingly, the Company places strong emphasis on strengthening robust cybersecurity systems alongside transparent communication practices to effectively mitigate risks associated with misinformation in the digital era.
To address risks associated with AI-driven misinformation and disinformation, Delta has implemented the following key measures: AI Governance and Policy Framework In alignment with its business growth strategy in AI-related areas, the Company established its first AI policy in 2024, referencing international frameworks such as the OECD principles and the EU AI Act. A structured AI governance framework is being developed, including the establishment of an AI Committee with cross-functional leadership from the CTO, CIOs of business groups, CO, CHRO, and relevant departments. The Committee is responsible for overseeing the responsible use of AI and strengthening cybersecurity measures to prevent AI-driven cyber threats and misinformation campaigns that could compromise brand integrity and critical data. In addition, the Company’s headquarters in Taiwan is in the process of obtaining ISO/IEC 27701:2019 certification to ensure that all products supplied to the Industrial Automation business in Thailand comply with the Privacy Information Management System (PIMS). Digital Monitoring and Surveillance The Company leverages AI-powered tools to monitor, analyze, and detect misinformation and disinformation across social media and digital platforms, enabling timely and effective responses to inaccurate information. Proactive Communication and Awareness The Company adopts proactive communication strategies to address misinformation while reinforcing its commitment to green technology and sustainability, ensuring accurate public understanding. Transparent Stakeholder Communication The Company provides accurate, clear, and timely information to stakeholders. Customers engaging in customized automation solutions are informed from the design stage about the use of AI, including its capabilities, limitations, and associated risks. This enables stakeholders to evaluate both best- and worst-case scenarios, prepare contingency plans, build trust, and distinguish reliable information from potentially misleading content. Crisis Management Planning The Company has established crisis response plans to address incidents involving misinformation or disinformation. Designated spokespersons are assigned, and clear protocols are in place to ensure timely, transparent, and effective responses to public concerns. In 2025, the Company did not experience any material financial losses resulting from personal data breaches, data mismanagement, or misinformation incidents.
The Company’s focus from long-term sustainability goals to short-term risk management. In addition, trade tensions may disrupt supply chains, limiting access to low-carbon materials and requiring the Company to adopt more flexible sourcing and operational strategies. Evolving regulations in key markets may also create compliance challenges, necessitating continuous monitoring and timely strategic adjustments. Rising costs from trade measures could impact investments in sustainability initiatives, making financial risk management increasingly important. Geopolitical uncertainty may further delay technology transfer and the adoption of new innovations, affecting the Company’s ability to advance critical technologies. At the same time, limited availability of renewable energy certificates (RECs) in certain regions may hinder progress toward carbon neutrality, requiring diversification of renewable energy sourcing strategies
To mitigate these risks, the Company has implemented the following measures: - Supply chain diversification : Expanding sourcing of low-carbon materials across regions with stable political environments and sustainable trade policies - Regulatory monitoring : Establishing dedicated teams to track policy changes and ensure timely compliance and strategic adaptation - Financial risk management : Implementing cost control measures and prioritizing investments to sustain progress in sustainability initiatives - Technology development and R&D : Strengthening internal innovation capabilities and collaborating with global partners to minimize delays in technology adoption - Renewable energy sourcing : Expanding on-site solar generation and diversifying procurement of renewable energy certificates (RECs), while engaging with government and relevant organizations to enhance renewable energy capacity - Internal carbon pricing : Implementing internal carbon pricing mechanisms to support investment decisions, accelerate low-carbon transition, and mitigate financial impacts on stakeholders As of December 31, 2025, the Company has achieved over 90% of its targets under the Science-Based Targets initiative (SBTi) and continues to actively close the remaining gaps.
Global tensions, rapid industrial transformation, and climate change have intensified operational risks, potentially disrupting production allocation, manufacturing transfers, and new orders driven by carbon neutrality goals. These factors place additional pressure on factory personnel, potentially leading to longer working hours, increased stress, and a decline in safety standards. Such inefficiencies may increase operating costs and negatively impact long-term profitability. Moreover, heightened workplace pressure may affect employee retention, as workers may seek more stable and safer working environments. In addition, geological disaster events in Thailand in 2025, along with pollution issues in various countries, have increased health and safety risks for employees and surrounding communities. Climate change also contributes to the spread of pests and both communicable and non-communicable diseases, necessitating stricter health measures. At the same time, material shortages and changes in production processes require more rigorous safety controls, particularly in handling new operations and chemical exposure. Comprehensive risk management is therefore essential to ensure safe operations, minimize environmental and health impacts, and support long-term talent retention.
Strengthening health and safety measures : The Company continuously enhances safety procedures across all manufacturing sites, with a focus on climate-related health risks, workplace stress, and emerging diseases. Regular safety training programs are conducted to keep employees informed of the latest health and safety practices. In addition, machine operation training is provided to ensure safe handling of new or upgraded equipment, and appropriate personal protective equipment (PPE) is supplied to mitigate emerging risks such as pollution and new working conditions. Climate resilience planning : Delta has developed climate resilience strategies to address health and safety risks arising from climate change. The Company invests in infrastructure designed to mitigate environmental and geological risks. All office buildings and manufacturing facilities constructed after 2014 incorporate disaster-resilient design principles, while also considering occupant well-being and environmental impact in accordance with WELL and LEED standards. Delta’s own solutions are utilized to enhance air quality monitoring and improvement within workplaces. Communication channels have also been strengthened to enable timely alerts to employees. Notably, during the geological disaster event in March 2025, there were no reported injuries, fatalities, or property damage. Workforce management and retention : The Company offers competitive benefits and incentives, with a strong emphasis on creating a safe and healthy working environment to minimize employee turnover. Employee wellness programs addressing both physical and mental health have been implemented to reduce stress caused by operational changes and extended working hours. Initiatives include a stress support hotline, partnerships with local fitness and wellness providers, and the provision of on-site psychiatric services to support employees’ mental well-being. Risk assessment across operations and supply chain : Regular risk assessments are conducted across manufacturing sites to evaluate the impact of geopolitical tensions, climate change, and supply chain disruptions on employee health and safety. Appropriate mitigation measures are implemented whenever there are changes in production processes or resource allocation. Sustainable operations and pollution reduction : The Company implements pollution reduction initiatives across all sites, working closely with local authorities to improve air and water quality. Strict environmental practices are enforced to ensure that pollution does not pose health risks to employees or surrounding communities. Emergency preparedness and contingency planning : Delta develops and regularly tests emergency response plans to address health-related crises, such as disease outbreaks and natural disasters. These plans align with local legal requirements and international standards, particularly in high-risk areas, ensuring effective and timely responses. Continuous monitoring and reporting : The Company continuously monitors health and safety performance across all operations and regularly reports findings to senior management. Transparent reporting mechanisms are in place to allow employees to raise safety concerns, enabling prompt resolution. This ongoing monitoring ensures that emerging risks are effectively managed and that high safety standards are consistently maintained across all operations.
Unlock full benchmarking
Claim this company to see every KPI your sector qualifies for, from 70+ across the market, benchmarked against sector peers.

